HP Slate 7 2801

From MRC Centre for Outbreak Analysis and Modelling
Revision as of 13:55, 2 May 2014 by Admin (talk | contribs) (Created page with "For the MRC Centenary event in June 2013, we acquired ten HP Slate 7" android tablets (type 2801). Below are some useful hints that could save you a lot of pain. == Camera No...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

For the MRC Centenary event in June 2013, we acquired ten HP Slate 7" android tablets (type 2801). Below are some useful hints that could save you a lot of pain.

Camera Notes

These tablets have front and rear facing cameras - the rear offering better resolution in theory. In practise, we found they don't auto-focus very well, and they don't have any flash/lighting, so if you are wanting to scan barcodes, especially in dim lighting, test it beforehand. Some were better than others too.

The pic2shop scanning app was by far the best at coping with the lack of auto-focus, and to an extent with the poor lighting. See the setup information for the Barcode Epidemic for more information.

Wireless Network Issue

The HP build of Android has a bug that prevents you from configuring it for an Enterprise wireless network, such as Imperial-WPA. It simply crashes when you push connect. HP claimed this would never be fixed on the tablet [1], however Chris found a workaround [2].

We installed Wifi Advanced Configuration Tool. To use it:

  • Pretend that you're joining the Imperial-WPA network in the usual way in Android - Settings, Wifi, and click on Imperial-WPA.
  • Don't set anything - just Save the default configuration.
  • Straightaway, run the Wifi Advanced Configuration Tool.
  • Click on Key Management, and check that WPA_EAP is set.
  • Go back, click on Enterprise Configuration. EAP should be set to PEAP by default.
  • Set Phase2 to MSCHAPv2.
  • Set Identity to user@ic.ac.uk - whatever your IC user name is.
  • Set Anonymous Identity to @ic.ac.uk.
  • Set Password to your IC password.
  • Now click back until the configuration tool goes away.
  • Settings, Wi-Fi and see if it connects to Imperial-WPA now.

An easy way of flattening the battery

Suppose the tablet is powered-off, but plugged into the wall charging. If you then unplug the USB charging cable, the tablet will automatically and silently power itself on, and if you don't spot it, it will stay on until its battery is totally flat. Learned about that the hard way.

Preparation for use with Barcode Epidemic

Coming soon...

Preparation for use with Herd Immunity

Coming soon...